手机礼品订单专用蓝牙耳机，低，芯片采用issc 创杰2。0
标准配置：蓝牙耳机+usb充电线+中文说明书
基本操作说明：
contents
- introduction
bluetooth wireless technology
- get started
overview
chargers and batteries
switch the headset on or off
pair the headset with compatible phone
disconnect the headset from the phone
troubleshooting
- basic use
warring the headset
call handing
- batteryinformation
- care and maintenance
- introduction
thank you for purchasing our bh32. together with bluetooth mobile phones or other bluetooth embedded devices,bluetooth headset bh32 allows you the freedom to make and receive calls while on the move or in the office. you can connect the headset to a compatible phone that supports bluetooth wireless technology.
please read the user manual to make the best use of this bh32 headset and its many features.
bluetooth wireless technology
bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. a bluetooth connection does not require the phone and the headset be in line of sight, but both devices should be within 10 meters (30 feet) of each other. connections can be subjected to interference from obstructions, such as walls or other electronic devices.
the headset is compliant with bluetooth specification 2.0 supporting headset profiles 1.1 and hands-free profiles 1.5. check with the manufactures of the other devices to determine their compatibility with this device.
there may be restrictions on using bluetooth technology in some locations. check with your local authorities or service provider.
- get started
■overview
the headset contains the following parts as shown in the figure:
(1)answer/end key
(2) led indicator (red/blue)
(3) earphone
(4) charging socket
(5) microphone
(6) ear hook
before start using the headset for the first time, you must make full charge to the headset.
note: parts of the headset are magnetic. metallic materials may be attracted to the headset. do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.
■charger and batteries
the bluetooth headset bh32 can be charged either by charger or by the usb port of computer. please notice that it is intended to use with the charger that is included in the package.
charge the battery
this device has a built-in, rechargeable battery.
-
the fully charged battery has power for up to 4 hours of talking time or up to 60 hours of standby time.however, the talking and standby times may vary when used with different mobile phones, usage settings, usage styles, and environments.
when the battery is running out of power, the red indicator light starts to flash and there will be 5 prompt sound every 20 seconds.
■switch the headset on or off
to switch on, press and hold the answer/end key for 4 seconds. the blue indicator light starts to flash 4 times and there is a prompt sound.
to switch off, press and hold the answer/end key for 4 seconds until headset beeps 2 times and the red indicator light flashes twice.
■pair the headset with a compatible phone
- make sure your headset is turn off
- push the answer/end key for 6 second until the blue and red light flashes alternately；
■disconnect the headset from the phone
to disconnect the headset from your phone (for example, to connect the phone to another bluetooth device), do one of the following:
·switch off the headset.
·disconnect the headset in the bluetooth menu of your phone.
·move the headset more than 10 meters(30 feet) away from the phone.
you do not need to delete the pairing with the headset to disconnect it.
■troubleshooting
if you cannot connect the headset to your phone, do as follows:
·ensure that the headset is charged, switched on, paired with and connected to your phone.
·ensure that the bluetooth feature is activated on your phone.
·check that the headset is within 10 meter(30 feet ) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices.
3. basic use
■warring the headset
ware the headset to your ear. usually speaking, the voice quality is best when there is no obstacles between mobile and headset, including your body. thus it is suggested to put your mobile and ware your headset at the same side.
■call handling
to make a call
use your phone in the normal way when the headset is connected to your phone.
to answer a call
press the answer/end key, or use the phone keys. if the automatic answer function is set on, the phone automatically answers the incoming call after one ring.
to end a call
press the answer/end key, or use the phone keys.
4. battery information
your device is powered by a rechargeable battery. the full performance of a new battery is achieved only after two or three complete charge and discharge cycles. the battery can be charged and discharged hundreds of times, but it will eventually wear out. recharge your battery only with compatible chargers designated for this device.
unplug the charger from the electrical plug and the device when not in use. do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. if left unused, a fully charged battery will lose its charge over time.
never use any charger that is damaged.
leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. always try to keep the battery between 15℃and 25℃(59℉and 77℉). a device with a hot or cold battery may not work temporarily, even when the battery is fully charged. battery performance is particularly limited in temperatures well below freezing.
do not dispose of batteries in a fire as they may explode. batteries may also explode if damaged. dispose of batteries according to local regulations. please recycle when possible. do not dispose as household waste
5. care and maintenance
your device is a product of superior design and craftsmanship and should be treated with care. the suggestions below will help you protect your warranty coverage.
·keep all accessories and enhancements out of the reach of small children.
·keep the device dry. precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. if your device does get wet, allow it to dry completely.
·do not use or store the device in dusty, dirty areas. its moving parts and electronic components can be damaged.
·do not store the device in hot areas. high temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
·do not store the device in cold areas. when the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
·do not drop, knock, or shake the device. rough handling can break internal circuit boards and fine mechanics.
·do ot use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
·do not paint the device. paint can clog the moving parts and prevent proper operation.
all of the above suggestions apply equally to your device, battery, charger, or any enhancement. if any device is not working properly, take it to the nearest authorized service facility.