mechanical characteristics: |
operating torque | 0.2~2n(20~200gf.cm) |
stopper strength | 50n(5kgf.cm)（measuring point=5mm） |
lever wobble | 2(2*l)/20mm max. (l: lever length both side) |
bending moment | 25mm.m(250gf.cm) |
push pull strength | 30n(3kgf) |
operating force | 0.2~2n(20~200gf.cm) |
lever deviation | 0.5 max.(one side) |
electrical characteristics: |
total resistance | 5kω～2mω |
total resistance tolerance | ±20%(more then 1 mω±30%) |
resistance taper | a,b,c |
insulation resistance | 100 mω min. at 250vdc |
withstanding voltage | one minute at 300vac |
rated power (w) | travel taper | 15mm | 20mm | 30mm | 45mm |
b | single | 0.05 | 0.1 | 0.2 | 0.25 |
dual | 0.025 | 0.05 | 0.1 | 0.145 |
except b | single | 0.025 | 0.05 | 0.1 | 0.125 |
dual | 0.03 | 0.025 | 0.05 | 0.06 |
max. operating voltage(vac) | b | 100 | 200 | 200 | 200 |
except b | 50 | 150 | 150 | 150 |
residual resistance | total resistance: | 10kω | 50kω | 100kω | 200kω | 500kω | 1mω |
between terminals 1 to 2 | 10ω | 10ω | 10ω | 20ω | 20ω | 20ω |
between terminals 2 to 3 | 10ω | 10ω | 20ω | 20ω | 50ω | 50ω |
slide life | 10,000 cycles |