单颗1w正白大功率led
| 品牌 |
liyu |
型号 |
ly-pe01ww1-a1e |
| 应用范围 |
发光(led) |
结构 |
面接触型 |
| 材料 |
磷砷化镓(gaasp) |
封装形式 |
功率型 |
| 封装材料 |
树脂封装 |
功率特性 |
大功率 |
| 频率特性 |
高频 |
发光颜色 |
白色 |
| led封装 |
无色透明封装(t) |
出光面特征 |
面发光管 |
| 发光强度角分布 |
高指向性 |
正向工作电流 |
350ma(a) |
| 最高反向电压 |
5v(v) |
| |
产品名称:单颗1w正白大功率led
产品型号:ly-pe01ww1-a1e
产品详细参数:
dimension drawing:
产品尺寸:
absolute maximum ratings at ta =25°c 室温下产品相关参数对照
items 型号 | symbol 符号 | absolute maximum rating 绝对数值 | unit 单位 |
forward current 正向电流 | if | 350 | ma |
peak forward current* 瞬间冲击电流极限值 | ifp | 1000 | ma |
reverse voltage 反向电压 | vr | 5 | v |
power dissipation 耗散功率 | pd | 1400 | mw |
operation temperature 工作环境温度 | topr | -30 ~ +110 | °c |
storage temperature 储存温度 | tstg | -40~ +120 | °c |
esd sensitivity 静电击穿电压 | vb | 4000 | v |
led junction temperature led接点温度 | tj | 125 | °c |
manual soldering time at 260℃(max) 人工焊接时间 | tsol | 5 | seconds |
notes:
1) ifp≤ 100μs, duty cycle=0.25 2) it is strongly recommended that the temperature of lead frame’s bottom be not higher than 90°c.
typical electrical,optical &thermal characteristics(ta=25°c) 室温下相关电性,光性及热性规格参数表
items 型号 | symbol 符号 | condition 状态 | min. 最小值 | typ. 中间值 | max. 最大值 | unit 单位 |
forward voltage 正向电压 | vf | if=350ma | 3.2 | 3.4 | 3.8 | v |
reverse current 反向电流 | ir | vr= 5v | --- | --- | 5 | ma |
corelative color temperature 色温 | tc | if=350ma | 6000 | --- | 6500 | k |
chromaticitydiagram 显色性图表 | x | if=350ma | --- | 0.313 | --- | --- |
y | if=350ma | --- | 0.332 | --- | --- |
luminous flux 光通量 | ψv | if=350ma | 100 | --- | 110 | lm |
50% power angle 半视角 | 2q½ | if=350ma | --- | 140 | --- | deg |
thermal resistance(junction to bottom) 热阻(接点到铝基板) | rqj-b | | --- | 10 | --- | °c/w |
important notes:
1) all ranks will be included per delivery, rank ratio will be determined by ledliyu
2) tolerance of measurement of luminous flux is ±10%.
3) tolerance of measurement of corelative color temperature is ±5%.
4) tolerance of measurement of vf is ±0.1 v.
5) the product will be packaged in anti-static plastic box.
6) please refer to high power led reliability test standard for reliability test conditions.
7) use alcohl-based cleaning solvents such as isopropyl alcohol to clean the led if necessary.
应用领域:
交通信号灯、背光灯、手电筒、头灯、路灯、矿工灯、led显示屏、射灯、汽车照明、投光灯、城市亮化工程、生活照明、装饰照明、娱乐设施照明、风景设施照明等方面。