ys肖特基二极管sb360

features
?   guard ring die construction for transient protection
?   low power loss, high efficiency
?   high surge capability
?   high current capability and low forward voltage drop
?   surge overload rating to 80a peak
?   for use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications?     lead free finish, rohs compliant (note 4)?     iec 61000-4-2 (esd - 150pf/330w)
contact -?15kv


a                       b                        a

do-201ad dim min max a 25.40 ? b 7.20 9.50 c 1.20 1.30 d 4.80 5.30 all dimensions in mm

c
d

mechanical data                                            
?  case:  do-201ad
?  case material: molded plastic.  ul flammability classification
rating 94v-0
?  moisture sensitivity: level 1 per j-std-020c
?  terminals: finish - tin. solderable per mil-std-202, method 208  e3
?  polarity: cathode band
?  marking: type number
?  weight:  1.1 grams (approximate)
maximum ratings and electrical characteristics   @ ta= 25?c unless otherwise specified
single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%.

characteristic	symbol	sb320	sb330	sb340	sb350	sb360	unit
peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 2)	vrrmvrwmvr	20	30	40	50	60	v
rms reverse voltage	vr(rms)	14	21	28	35	42	v
average rectified output current (note 1)                                                        (see figure 1)	io	3.0					a
non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load	ifsm	80					a
forward voltage                                               @ if= 3.0a	vfm	0.50			0.74		v
peak reverse current                                   @ ta=   25?c at rated dc blocking voltage (note 2)         @ ta= 100?c	irm	0.5					ma
		20			10
typical thermal resistance (note 3)	rqja	30					?c/w
	rqjl	10
operating temperature range	tj	-65 to +125			-65 to +150		?c
storage temperature range	tstg	-65 to +150					?c

 

notes:     1.  measured at ambient temperature at a distance of 9.5mm from the case.
2.   short duration pulse test used to minimize self-heating effect.
3.  thermal resistance from junction to lead vertical p.c.b. mounted, 0.500" (12.7mm) lead length with 2.5 x 2.5" (63.5 x 63.5mm)
copper pad.