彩色lcd nokia knock-off

品牌 sparkfun 型号 00569
种类 lcd液晶屏 屏幕尺寸 1.5(英寸)

color lcd 128x128 nokia knock-off

description:finally! color lcds you can afford and play with! yet another product based on an sfe customer request, this 128x128 mini color lcd is a perfect match for your next portable application.

what we””ve found over in china is a ””copy”” of the nokia lcd found in models 6100, 6610, 7210, 7250, and 5100? we don””t know what phones it fits, and we don””t really care. this inexpensive lcd comes with a powerful white led backlight and a relatively simple serial interface. it””s a 9-bit interface, so beware. but we were able to get the lcd up and running on a lpc2138 with a few hours worth of work.

please note:this lcd is meant to replace a broken screen in a cell phone. the connector (both on the lcd and on the pcb) wasnotdesigned for multiple attachment/detachment. please secure your lcd is place with double stick tape to prevent stress on these connectors. this lcd issmall! please see the comparative photos. with that said, it is still superbly readable at arms length (cell phone technology).

we””ve got the lcd and example c code for $20. you really can””t say no! we even sell the loose connector for $2 in case you are worried about soldering the tight 0.5mm pitch.

frame dimensions:1.35x1.58"
active display dimensions:1.2"x1.2"

features:

  • lcd logic - 3.3v @ 2-3ma
  • led backlight - 7v @ 40-50ma (very bright)
  • full 4,096 color display
  • uses the epson s1d15g10 or philips pcf8833 controller (we cannot guarantee which one you will receive, please see jim lynch””s tutorial below as to why)

documents:

  • latestlpc2148example code from sfe, works with both controllers
  • latestatmega8 examplecode from sfe, works with epson controller
  • interface tutorialby jim lynch
  • epson controllerdatasheet
  • sfe eagle libraryhas this part!
  • theholy grail forum postingfor this nokia type lcd
  • examplepixel control of lcd
  • exampleparallax stamp bs2 code- thanksterry!screenshot
  • exampleatmega32 code- thanks jimbo!
  • examplesam7-p64 arm code- thanks again jimbo!
  • example3d graphics projecton a pic
  • exampleatmega644/128/32/16 code- care ofcathy
  • examplegumstix interface- thanks areth
  • examplepic 16f87x codefor ccs compiler - thanks marcus
  • examplepic 18f4550 usb- thanks francesco
  • example4096 color control- beautiful! thanks loren blaney
  • examplelinux driver- thanks zsolt
  • exampleimage converter- thanks jamie samayoa
  • bitmap converter- thanks sebastian

pin out (use the numbering visible on the display connector):

  1. vcc-digital (3.3v)
  2. reset
  3. sdata
  4. sck
  5. cs
  6. vcc-display (3.3v)
  7. n/c
  8. gnd
  9. led gnd
  10. led v+ (6-7v)